Design Marking Sticker
 |
 |
Tamiya 53839 RC Marking Sticker - Star & Fire Design |  |
 |
US $8.80 | 18d 11h 18m |
 |
Tamiya #53840 - RC Marking Sticker Tribal Flame Design | |
|
US $8.90 | 6d 12h 19m |
 |
Tamiya #53839 - RC Marking Sticker - Star & Fire Design | |
|
US $7.40 | 27d 18h 44m |
| Powered by phpBay Pro |
Design Marking Sticker
iPod Nano paint job?
sorry for the many questions but please answer even just one.
1)can i paint my ipod with a paintbrush without ruining it?
2)what paint do i use to paint it?acrylic?
3)can i remove the paint by using a thinner?
4)should i just use a sticker instead of painting it?
5)will the sticker make marks if i remove it?
6)where do i get a sticker that does not have a design but just plain white?
the gelaskin looks good but i cant buy stuff online and i dont think there are any in where i live in. so wil regular stickers for papers do?
1) You can't generally use paintbrush as one, you can't get a very even layer of paint and two, you may be lefted with brush marks.
2) Don't use acrylics as you will ruining your ipod and the paint will flake off.
3) You don't use thinner on acrylic as it is a water based paint not an oil paint.
4) With stickers and transfers you will still have the same problem of flaking and peeling.
5) Stickers will leave sticky remains behind but these are easy to remove.
6) Plain white stickers you can get from the post office or stationary shop.
The best way to put a design on your ipod is to get some thinner, car spray and some scotch tape. Tape up the screen and place a tape design on the ipod. Using an airbrush place you colour car spray in the brush pot, add a small amount of thinner and spray lightly over the ipod. Leave to dry and repeat. To layer different colours, make sure you use light colours as the lower layers.
|
|
Tamiya 53839 RC Marking Sticker - Star & Fire Design | |
|
US $8.80 | 18d 11h 18m |
|
Tamiya #53840 - RC Marking Sticker Tribal Flame Design | |
|
US $8.90 | 6d 12h 19m |
|
Tamiya #53839 - RC Marking Sticker - Star & Fire Design | |
|
US $7.40 | 27d 18h 44m |
| Powered by phpBay Pro |
| Account limit of 2098 requests per hour exceeded. |
Bike Frame Builders Portland Airport Exhibit
Guitar Fret Mark design...?
Can some one help me where to find the stickers to stick on my guitar neck so it look cooler and b/c my fret marks kinda faded so i just want to use the stickers to replace it.
Almost anything will do. If you can find large, one-colored stickers, you can cut out the designs yourself - never mind what the original stickers are of, you just want some large enough to accommodate your own design and toss the trim. A friend of mine is a sign maker and he just used a reflective green vinyl from work to cut out his own. It's a great way to dress up a guitar, that's for sure. If you know a sign maker or know where one is located, you could ask for scrap for this purpose or offer to pay a modicum for it. You need to use tape to transfer the vinyl, however. It's not hard.
